Hot drilling technology refers to the technique of inserting diamonds on leather, fabric, and other materials to make the finished products more beautiful and beautiful.
Hot drilling is divided into three steps:
1. Drill 2. Drilling 3. Diamond how to choose drilling 1, first look at the appearance:
First look at the cutting surface of hot drilling, the more cutting surface, the higher his refractive power, the better the brightness, and secondly, whether the cutting surface is even, there are cut teeth, scratches, bubbles are considered defective. Hot drilling process requirements are strict, the process is complex, and the finished product rate is not very high. Diamonds with a defective product rate of 3%-5% should be regarded as good products, and then see if the diamond size is the same. SS6 has a diameter of 1.9-2.1mm and SS10 has a diameter of 2.7-2.9mm. It should also see whether the thickness is the same.
2. Look at the back of the plastic and turn the diamond over to see the color of the back side glue. Whether the color is uniform or not can not be different. The color is bright and uniform and it is regarded as a good diamond.
3. The higher the solubility of the adhesive on the back of the firm hot drilling, the better the firmness of the diamond. The best way to identify diamonds is to wash them in the washing machine after they are hot and wash them. After washing, they can't fall off. It proves that the fastness is good and it is washed off. It proves that the firmness of the glue is not good, and good product dry cleaning is not lost.
Drill the first to use kraft paper to do a variety of pattern templates, and then the diamond lined up to a fixed position on the kraft paper, and then stick out a good line of viscose paper used to make diamonds.
Hot drilling hot drilling mainly used several types of machines, they are: ultrasonic hot drilling rig, ultrasonic point drill, ultrasonic drilling rig, heat transfer machine and so on.
Hot drilling is divided into three steps:
1. Drill 2. Drilling 3. Diamond how to choose drilling 1, first look at the appearance:
First look at the cutting surface of hot drilling, the more cutting surface, the higher his refractive power, the better the brightness, and secondly, whether the cutting surface is even, there are cut teeth, scratches, bubbles are considered defective. Hot drilling process requirements are strict, the process is complex, and the finished product rate is not very high. Diamonds with a defective product rate of 3%-5% should be regarded as good products, and then see if the diamond size is the same. SS6 has a diameter of 1.9-2.1mm and SS10 has a diameter of 2.7-2.9mm. It should also see whether the thickness is the same.
2. Look at the back of the plastic and turn the diamond over to see the color of the back side glue. Whether the color is uniform or not can not be different. The color is bright and uniform and it is regarded as a good diamond.
3. The higher the solubility of the adhesive on the back of the firm hot drilling, the better the firmness of the diamond. The best way to identify diamonds is to wash them in the washing machine after they are hot and wash them. After washing, they can't fall off. It proves that the fastness is good and it is washed off. It proves that the firmness of the glue is not good, and good product dry cleaning is not lost.
Drill the first to use kraft paper to do a variety of pattern templates, and then the diamond lined up to a fixed position on the kraft paper, and then stick out a good line of viscose paper used to make diamonds.
Hot drilling hot drilling mainly used several types of machines, they are: ultrasonic hot drilling rig, ultrasonic point drill, ultrasonic drilling rig, heat transfer machine and so on.
Flying Flag,Flying Flags ,Flying Flags Map,Flying Flag In Rain
Advertising Banner, Flying Flag Co., Ltd. , http://www.nbdecals.com